Last updated November 2026
Timaru is built on rolling ground, and plenty of sections step down from the street, slope towards a back fence or were cut and filled to make room for a house. A retaining wall turns that slope into usable space: a flat lawn, a level patio, a raised garden bed or a driveway that does not wash out in heavy rain.
★View the Best Garden Rock and Stone Suppliers in Timaru→A retaining wall also holds back a lot of weight, so it is worth planning properly. This guide covers when you need a building consent in Timaru, the main types of wall, why drainage matters so much and how to give a wall a stone finish.
Do You Need a Building Consent?
Under Exemption 20 in Schedule 1 of the Building Act 2004, a retaining wall does not need a building consent if it retains no more than 1.5 metres depth of ground and does not support any surcharge. MBIE’s guidance on building work that does not need a consent explains the conditions in detail.
A surcharge is any extra load on the ground the wall is holding up. Common examples are:
- A driveway, parking space or turning area near the top of the wall
- A house, garage, shed or other building close to the wall
- A swimming pool or spa
- Sloping ground above the wall, which adds weight of its own
If the wall retains more than 1.5 metres, or any of these sit above it, you will generally need a building consent and an engineer’s design. Rural zones have their own exemption for taller walls designed by a chartered professional engineer, so check which rules apply to your property.
Exempt work still has to meet the Building Code, and the exemption does not cover other rules such as the district plan or the Resource Management Act. If a wall drops one metre or more onto a path, lawn or driveway, a safety barrier is likely to be needed as well. Timaru District Council’s page on exempt building work has contact details for its building advisory team, who can talk through your plans before you start.
Types of Retaining Wall
Timber pole and rail
- How it works
- Treated timber posts set in concrete, with horizontal rails behind them
- Good to know
- Common for garden walls; posts are usually H5 treated and rails H4 for ground contact
Concrete block
- How it works
- Reinforced, concrete-filled masonry blocks on a concrete footing
- Good to know
- Strong and long lasting, and a good base for a stone or plastered finish
Interlocking or keystone block
- How it works
- Stacked precast blocks that lock together, often set back slightly as they rise
- Good to know
- Suits DIY garden walls at lower heights; follow the maker’s height limits
Gabion
- How it works
- Wire mesh baskets filled with rock
- Good to know
- Free draining with a natural, rocky look; needs room for the baskets
Natural stone
- How it works
- Dry-stacked or mortared stone
- Good to know
- A traditional look that takes skill to build well, especially as height increases
For a low garden wall, timber and interlocking block are the usual DIY choices. Taller walls, walls on a boundary and walls near buildings or driveways are better left to a builder or landscaper, with an engineer involved where needed.
Drainage: Why Walls Fail
Water is the main enemy of a retaining wall. When soil behind a wall gets saturated it becomes much heavier and pushes harder against the wall, and in winter that wet ground can also freeze and expand. Many walls that lean, bulge or crack do so because water was never given a way out.
A well built wall usually has:
- A layer of free-draining gravel or drainage metal directly behind the wall
- A perforated drain pipe, wrapped in a filter sock, along the base of the wall
- An outlet that takes that water somewhere sensible, not onto a neighbour’s property
- Weep holes in solid walls such as concrete block, so water cannot build up behind them
- Ground at the top shaped so rain runs away from the wall rather than into it
Giving a Retaining Wall a Stone Finish
A concrete block wall does the structural work well, but bare block is not much to look at. Many people finish the face with stone so the wall looks like part of the garden rather than a piece of infrastructure.
The main options are natural stone laid against the block, natural thin stone veneer, or manufactured stone veneer cast from real stones and coloured to match. A few points apply whichever you choose:
- The veneer is a finish, not the structure. The block wall behind does the retaining, so design and build it as if the stone were not there.
- Weight matters. Lightweight veneers can usually go straight onto the block without a wider footing or wall ties. Natural stone is heavier, so check what support it needs.
- Waterproof the back of the wall. Moisture moving through the block from the soil side can stain or loosen the face, so the retained side should be waterproofed and drained.
- Finish the top. Cap stones or trims keep water out of the top of the wall and give a tidy edge.
The same approach works for raised planter bins, letterbox walls and entrance walls at the end of a driveway, which are often built in block and faced to match the house.
Before You Start
- Find your boundaries. A wall on or near a boundary affects your neighbour, and the footing, backfill and drainage all need to stay on your side.
- Locate underground services. Use beforeUdig to check for cables and pipes before any digging.
- Think about access. Getting a digger, drainage metal and block or stone to the back of a section is often the hardest part of the job.
- Plan the finish early, so the footing, the wall and any stone facing are designed together.
Where Classic Stone Fits
Classic Stone, a New Zealand owned company established in 2000, makes stone veneer at Winchester, just north of Temuka, and supplies it for retaining walls, planter bins and entrance ways as well as houses and fireplaces. The veneer is lightweight, at 30 to 50kg per square metre, so it needs no additional footing or wall ties, and it goes over concrete block, brick, precast panels and fibre cement sheet. Classic Stone says planter bins and retaining walls can be faced by any competent tradesperson or handyman, and it can give detailed instructions.
Profiles include Southern Ledgestone, Colonial Schist, River Stone and New Zealand Basalt. To see them in person, request samples through the website or call (03) 688 7036.
